Multifunctional pilot system for laboratories
Labline is the multifunctional pilot plant for laboratory with working possibility by coating knife and cylinder complete with oven and wet or "one-coat" laminating. Suitable for direct coating and transfer coating.
It's a scale line where test runs, trials, samples and pre-production batches can be performed.
The machine is supplied complete of: two doctor coating blades profiles P 20 and R 30, one coating roller, pneumatic expansible shafts.
The coating head is equipped for the following operations:
- Coating with doctor blade for "thickness" coating;
- Coating with doctor blade for "on-air" coating;
- REVERSE finishing with engraved roller for coatings on films or product. An important aspect: the REVERSE roller system enables the use of water based products. Excellent with foamed products too;
- SYNCHRO applications with "multipoint" roller for special effect finishing on embossed synthetic leather, two tones effects, lacquering. Using a design roller, it's ideal for print finishes and special effects.
Thanks to laminating cylinders, composed by two nip rollers,
Labline offers:
- Wet lamination system (with application of adhesive, fabric lamination and reticulation in the dryer);
- "One-coat" processing system (with application of adhesive, drying coupling at the dryer exit, melting of thermal adhesive by a heated cylinder).
EASY TO USE- Rapid changes of the coating head: changeovers from doctor blades to roller finishing system (and vice-versa) take very little time;
- All thickness adjustments and pressure adjustments are easy to set and controlled by high precision instruments (centesimal comparators);
- Machine controls are easily accessible.
LOW RUNNING COSTS OF THE PLANT- It cuts down on chemical products, electrical power, release and support paper;
- Only one operator is required;
- Very easy to install thanks to its compact size.
AVAILABLE OPTIONALS- Cylinder heating system;
- Lower scraping blade for "on-air" coating (suggested for fabric).
